Abubuwan da kuke so ba su bayyana a cikin saitunan nuni na Ubuntu?

Idan ka je kan Tsarin Tsarin Tsarin kuma ka shigar da masu saka idanu, zaka ga cewa kudurorin da suka bayyana, a lokuta da yawa (misali wadanda suke da Intel hoto) sun yi kasa ko kuma ba wadanda kake so a saka maka ba, za mu gyara ta don haka wanda zai fara zaman tare da ƙudurin da kake so.

Wannan gudummawa ce daga Antonio José Ruiz Gracia, don haka ya zama ɗayan waɗanda suka yi nasara a gasarmu ta mako:Raba abin da ka sani game da Linux«. Taya murna Antonio!

Matakai na gaba

Muna tafiya zuwa Tsarin Tsarin Tsarin kuma zaɓi Tushen Software, Additionalarin Direbobi shafin, dole ne ya zama fanko saboda ba a amfani da direbobi na mallaka.

Muna zuwa Tsarin Tsarin Tsarin Mulki> Masu saka idanu kuma zamu ga yadda a cikin ƙudurin taga akwai 'yan kaɗan don zaɓar, banda rashin amfani:

Amma bari mu ga yadda katin bidiyon mu yake aiki.

Muna shigar da kunshin kayan masarufi don katunan Intel, Ati da Nvidia:

sudo dace-samun kayan masarufi

Mun kara ma'ajiyar direbobi na kyauta ga Intel, ATI da Nvidia:

sudo add-apt-mangaza ppa: xorg-edgers / ppa

Muna sabunta wuraren adana tsarin da tsarin kanta.

Sudo apt-samun sabunta sudo apt-samun inganci

Dole ne a sake kunna kwamfutar.

Yanzu muna gwada yadda hanzarin zane yake gudana:

glxinfo | grep - na bada

Idan muka ga fassara daidai: ee, daidai ne. Zamu iya ganin ta a hankali ta hanyar buga abubuwa masu zuwa a cikin tashar mota:

glxgear

Yanzu, bari mu fara aiki

1. Daga Terminal kun rubuta umarnin mai zuwa:

sudo xrandr

Zai nuna mana yanayin zane mai aiki. Xrandr umarni ne don yin aiki / canza ƙudurin allo, amma sake farawa sai ya ɓace.

2. Mun sanya ƙuduri:

sudo cvt(x)(y)

Inda "x" da "y" suke bayanan ƙuduri, misali "1280 1024", kamar yadda kuke gani an raba su da sarari)

3. Mun shiga, misali:

1280 1024 cvt

Zai bayyana wani abu kamar haka:

1280x1024 59.89 Hz (CVT 1.31M4) hsync: 63.67 kHz; pclk: Tsarin MHz 109.00 MHz "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync + vsync

4. Daga baya zamu zabi komai a layin "Modeline" don amfani dashi a cikin fayil.

5. Za mu samar da fayil xorg.conf a daidai wurin, tunda da tsoho Ubuntu baya amfani da shi kuma ana amfani dashi don saita daidaitaccen X (uwar garken zane).

sudo gedit /etc/X11/xorg.conf

6. Za ku ga cewa an samar da shi da fari. Muna kwafa mai zuwa kuma liƙa shi a cikin fayil ɗin fanko:

Tsanaki: a cikin wannan darasin Horizsync da Vertrefresh sigogi suna da bayanan Monitor tare da ƙuduri na 1440 × 900, don magance wannan matsalar dole ne ku nemo ƙimomin Kulawar ku.
Sashe "Mai gano" Na'urar "Na'urar Bidiyon da Aka Sanya" Sashin EndSection "Saka idanu" Mai Gano "Sanarwar Tsararru" Vendorname "Generic LCD Nuna" Modelname "LCD Panel 1440x900" Horizsync 31.5-64.0 Vertrefresh 56.0 - 65.0 modeline "1440x900_60.00" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync + Vsync Gamma 1.0 # modeline "640x480 @ 60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync # modeline "800x600 @ 56" 36.0 800 824 896 1024 600 601 603 625 + hsync + vsync # modeline "800x600 @ 60" 40.0 800 840 968 1056 600 601 605 628 + hsync + vsync # modeline "1024x768 @ 60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync # modeline "1440x900_60.00" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync + Vsync EndSection Sashe "Allo" Mai Gano "Tsoho Allon" Kulawa Yanayin 24 "1x1440" EndSubSection SubSection "Nuni" Zurfin Yanayi 900 "4 1440x900 "EndSubSection SubSection" Nuni "Zurfi 8 Modes" 1440x900 "EndSubSection SubSection" Nuna "Zurfi 15 Modes" 1440x900 "EndSubSection SubSection" Nuni "Zane 16 Yanayi" 1440x900 "EndSubSection EndSection

Kasancewa haka:

7. Muna neman masu zuwa a cikin fayil din "xorg.conf" kuma share shi (kun zaɓi shi kuma ku share shi tare da maɓallin Share):

modeline "1440x900_60.00" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync + Vsync

8. Muna liƙa abin da aka kwafa a cikin aya ta 2-3, wanda a nawa yanayin shine:

Tsarin zamani "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync + vsync

9. A cikin layuka masu zuwa zaku ga alamun zantawa ko alama ta lamba. Yi sabon layi a saman su sannan a buga sabon pad, a sake liƙa abin da aka kwafa a mataki na 8. Ta wannan hanyar za a jera shi a cikin daidaitawar allo yayin da muka samu dama don canza ƙuduri.

10. A cikin edita, za ka je menu na sama don Nemo-Sauya, ka duba cikin Sashe na “Allon” “1440 × 900” wanda shine abin da fayil din da aka lika yana da shi kuma ka maye gurbinsa da “1280 × 1024” wanda shine shari’ata ko ƙudurin da kuke buƙata.

11. Adana kuma rufe editan.

12. Kun sake kunna kwamfutar, kuna zuwa saitunan tsarin> Masu saka idanu kuma canza ƙudurin da kuke so.

13. Ban yi ƙoƙarin sanya ƙarin ƙuduri ba saboda bana buƙatar su, amma tare da wannan aikin ana iya ƙara su.


Abubuwan da ke cikin labarin suna bin ka'idodinmu na ka'idojin edita. Don yin rahoton kuskure danna a nan.

97 comments, bar naka

Bar tsokaci

Your email address ba za a buga.

*

*

  1. Mai alhakin bayanan: Miguel Ángel Gatón
  2. Dalilin bayanan: Gudanar da SPAM, gudanar da sharhi.
  3. Halacci: Yarda da yarda
  4. Sadarwar bayanan: Ba za a sanar da wasu bayanan ga wasu kamfanoni ba sai ta hanyar wajibcin doka.
  5. Ajiye bayanai: Bayanin yanar gizo wanda Occentus Networks (EU) suka dauki nauyi
  6. Hakkoki: A kowane lokaci zaka iyakance, dawo da share bayanan ka.

  1.   Joman Romich m

    hola

  2.   Joman Romich m

    Barka dai. Ina amfani da mint13 64b akan acer aspire 4750, zane-zane yana da kyau… Na haɗa ta HDMI zuwa 32 ”panasonic LED kuma na sami matsaloli game da ƙuduri. Na bi duk matakan kuma komai ya tafi daidai. Abinda ke waje da abin da nayi shawara shine sabunta kernel kafin komai. Yanzu sababbin zaɓuɓɓukan ƙuduri sun bayyana a cikin daidaitawar masu saka idanu 1280 × 720 suna ba da LED sannan ta waɗannan matakan ƙara wannan zaɓin - 1280 × 720 - Na sanya mai saka idanu da LED tare da ƙuduri iri ɗaya amma matsalar ta ci gaba. me nayi kuskure? sauran zaɓuɓɓukan ƙudurin LED ba sa ƙari ko dai. Shin wani zai iya ba ni hannu? Na gode sosai!

    1.    hafsat_hassan_ m

      A halin da nake ciki na yi amfani da wannan hanyar kuma idan tana aiki amma ban aiwatar da ƙuduri ba, ma'ana, ya ba ni zaɓi amma ba ta aiwatar da shi ba kuma ana share shi duk lokacin da na sake farawa, idan har umurnin xrandr ya ce a cikin ta'azantar da cewa ba zai yuwu a daidaita mitar ba tare da kuskure da ke cewa "Ba a sami girman gamma ba don fitarwa ta asali" mafita ita ce a girka BAKATON SHAFA don sake girke gurnani da sake girke gib, amma dole ne a ba shi a cikin zaɓuɓɓukan ci gaba zaɓi wannan ya ce GFX_MODE wanda shine wanda ke gyara ƙyallen don Gano maɓallin saka idanu ta atomatik da voila. Bayan amfani da wannan hanyar da gyaran fayil ɗin Xorg.conf, wannan shine kawai wanda yayi aiki. Ina fatan zai yi muku amfani

      1.    ector m

        a harkata ni ma kuma ina da cikakken kuduri.

  3.   patirik m

    ufff that bad, Ina nufin ba zan iya yin komai ba? saboda na riga na duba a cikin google kuma akwai wani cigaba a wani direba da na saukeshi, nima naga direbobi marasa izini amma ban sani ba ... da kyau zan ci gaba da kallo amma idan kun san wani abu ko wani ya san wani abu ku gaya mani xD godiya.

  4.   Gaius baltar m

    Matsalar ita ce direbobin hukuma. SiS ba shi da godiya ga Linux (kuma yana magana ne game da zane-zane, tuni yana da laifi wanda wani zai iya cutar da mu fiye da ATI) Idan wani ya yi direba mara izini, zai fi kyau ... 😉

    Kuna gwadawa, idan ba a gwada tare da distro mai nauyi ba ko shigar da LXDE ko XCFE azaman yanayi mai zane. 😉

  5.   Gaius baltar m

    poof, Ina so in ba ka hannu, amma ina tsammanin cewa SIS (da abubuwa da yawa daga VIA) ainihin "Kristi" ne tare da Linux ... Tare da ATI, NVIDIA ko Intel har yanzu kuna iya gyara tare da mai mallakar mai mallakar, amma SIS abu ne mara kyau ... Duk da haka, tare da «sis 771 ubuntu» a cikin google akwai matakai da yawa da za a iya samu, sau ɗaya na taɓa mu'amala da ɗayansu, amma ina ganin ba shi da wani amfani a gare ni ... 🙁

  6.   patirik m

    Barka dai, a jiya na sanya Linux mint 14 amma kadan ya rage min, ana ganin cewa daga graf din ina da SIS 771/671 rev. 10 windows ba sa tafiya lami lafiya kuma fina-finan 720p ba su da laushi, idan wani zai iya taimaka min game da wannan matsalar zai yi kyau sosai !! Wasu mafita dole ne su gani ... kuma ba na son komawa don cin nasara 7 duk da duk abin da nake yi sosai tare da iska da kuma yadda aka loda shi da kyawawan abubuwa, gaishe gaishe ko kuna iya ba ni hannu!

  7.   Navi m

    Na girka a kwamfutar ubuntu kuma na sami wannan matsalar; Amma mafita ita ce wannan umarnin "sudo dpkg-reconfigure gdm" kuma zabin zabi GDM kuma sake kunnawa ya bayyana a cikin tashar, tunda a cikin sanya post din na zabi LIGTH DM kuma hakan bai bani damar ganin matsakaicin matakin saka idanu ba.

  8.   Bari muyi amfani da Linux m

    KO Kyakkyawan kwanan wata. Godiya ga raba shi

  9.   Lipe Gutierrez Cotapos m

    Ina da wannan matsalar amma tare da saka idanu na waje wanda VGA ta haɗa, kuma duk lokacin da nayi amfani da shi ina ƙara ƙuduri da hannu tare da:

    $ xrandr –newmode «1360x768_60.00» 84.75 1360 1432 1568 1776 768 771 781 798 -hsync + vsync
    $ xrandr –addmode VGA1 1360 × 768

    Ta yaya zan iya gyara fayil ɗin da aka bayar a nan don ya yi aiki tare da fitowar VGA?

    1.    hafsat_hassan_ m

      Lokacin da kake amfani da umarnin xrandr, yana nuna maka bayanan duk masu sa ido da aka haɗa tare da sunansu da shawarwarin kowane ɗayansu, don haka ina ba da shawarar ka yi wannan darasin, sun bayyana shi kwata-kwata a can

      http://abfloresn.blogspot.com/2013/01/problemas-con-la-resolucion-de-pantalla.html

  10.   Gaius baltar m

    Ban san yadda xorg tare da masu saka idanu da yawa suke kama ba ... amma har yanzu kuna da ƙara ɓangaren "allo" ga waɗanda suka fi girma.

  11.   morey ureña m

    yauwa na gode sosai :), yayi hijira daga windows zuwa ubuntu kuma wannan shine babbar matsalata, godiya gare ku na warware shi !! na gode sosai dan uwa 🙂

  12.   Eliezer m

    Barka dai, ina bin duk matakai akan kwamfutar tafi-da-gidanka kuma hakan baya bani damar zaban wani kuduri da zai iya kuskure? Na duba koda kananan bayanai ne na fayil din kuma babu komai. Yana da Lenovo 3000 c200!

  13.   Fernando Paz m

    Yayi min aiki daidai, kawai na tsallake ɓangaren kayan tebur. Na gode.

  14.   Fran m

    Kai ne gatari Jirgina Gigabyte ne tare da ginannen AMD radeon 4200. Ya yi aiki. Na gode.

    1.    bari muyi amfani da Linux m

      Don haka muke. Rungume! Bulus.

  15.   Manuel m

    Na bi matakan kuma ban sani ba ko don saboda bani da direban xorg, amma ban sami ƙudurin da nake so ba kuma kafin ya kasance 1920 × 1080. Na samu guda 1440 × 900 kawai sai na duba na goge abin da ya fada a cikin fayil din kuma na maye gurbin shi kuma na sami 1440 × 900 ƙuduri.

    1.    mggr 148 m

      Ina da matsala iri ɗaya kamar ku, kawai ya nuna min har zuwa 1440 × 900, hakan yana faruwa ne saboda a cikin wannan darasin Horizsync da sigogin Vertrefresh suna da bayanan Monitor tare da ƙimar mafi girman 1440 × 900, don magance wannan matsalar dole ku nemi Los dabi'u don Kulawa. A halin da nake ciki ina da LG 21,5-inch FULLHD Monitor waɗannan sigogi ne:

      Horizonsync 30.0-83.0
      Sabon 56.0 - 75.0

      Tare da wannan bayanan da aka kara zuwa xorg.conf Dama ina da 1920 × 1080 wanda shine ƙimar asali na mai kulawa.

      Na bar muku xorg.conf:

      Sashe «Na'ura»
      Mai Gano «Na'urar Bidiyon Da Aka Haɗa»
      Ƙarshen Yanki

      Sashe «Monitor”
      Ganowa «Saka idanu Na Musamman»
      Sunan Vendorn «Nau'in LCD Nuni»
      Sunan suna «LCD Panel 1920 × 1080»
      Horizonsync 30.0-83.0
      Sabon 56.0 - 75.0
      Modeline «1920x1080_60.00» 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync + vsync
      Gamma 1.0
      # modeline «1920x1080_60.00» 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync + vsync
      # modeline «640 × 480 @ 60» 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
      # modeline «800 × 600 @ 56» 36.0 800 824 896 1024 600 601 603 625 + hsync + vsync
      # modeline «800 × 600 @ 60» 40.0 800 840 968 1056 600 601 605 628 + hsync + vsync
      # modeline «1024 × 768 @ 60» 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
      # modeline «1920 × 1080 @ 60» 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync + vsync
      Ƙarshen Yanki

      Sashe «Allon»
      Mai Gano «Tsoffin allo
      Saka idanu «Sanya Mai Sanya
      Na'ura «Na'urar Bidiyo da Aka Haɗa
      Tsoho mai Tsayi 24
      Sananan Yanki «Nuni»
      Zurfin 1
      Yanayi «1920 × 1080»
      KarshenSubSection
      Sananan Yanki «Nuni»
      Zurfin 4
      Yanayi «1920 × 1080»
      KarshenSubSection
      Sananan Yanki «Nuni»
      Zurfin 8
      Yanayi «1920 × 1080»
      KarshenSubSection
      Sananan Yanki «Nuni»
      Zurfin 15
      Yanayi «1920 × 1080»
      KarshenSubSection
      Sananan Yanki «Nuni»
      Zurfin 16
      Yanayi «1920 × 1080»
      KarshenSubSection
      Sananan Yanki «Nuni»
      Zurfin 24
      Yanayi «1920 × 1080»
      KarshenSubSection
      Ƙarshen Yanki

      1.    KZKG ^ Gaara m

        Na gode sosai da kuka gaya mana maganin da yayi muku aiki, tabbas wasu ma zasu same shi da amfani 🙂

      2.    bari muyi amfani da Linux m

        Godiya, zakara!
        Rungumewa! Bulus.

      3.    alex m

        wani abu da ban fahimta ba shine inda na samo sigar Horizsync da Vertrefresh, ban gansu ko'ina ba

  16.   azadar_e_hussainXNUMX m

    hello, idan muka bi matakan don saita abin dubawa, yana da sauki

  17.   johnny m

    Mai girma, wannan labarin ya taimaka min sosai. Na gode!!

  18.   Carlos m

    Ina da matsala cewa ƙuduri 1024 × 788 bai bayyana a cikin daidaitawar ba, na yi abin da suke ba da shawara a nan kuma ban da har yanzu ba a nuna ƙudurin ba, yanzu gumakan tebur ba su bayyana, kuma sandar menu ɗin aiki ta zama baƙi, kawai Ni za a iya samun damar ta ta latsa alamar (windwos) da kuma ɗora linzamin kwamfuta a kan tsirin kuma ga bayanin don iya dannawa.
    Shin akwai hanyar da za a iya juyawa duk tsarin mataki-mataki? an fi so a sami allon a cikin ƙuduri mara daɗi fiye da wannan tare da baƙar fata.

    Godiya a gaba

  19.   Yesu m

    Na gode sosai, ya taimaka min sosai, na riga na san allo da yawa, aƙalla ba ni da 800 × 600: s Gaisuwa

  20.   Yuli m

    Na gode. Ya taimake ni. Na bi shawarar mrgm148.

  21.   Sergio m

    Na gode sosai da gudummawar. Kyakkyawan koyawa. Yayi min aiki.

  22.   Paulmansilla m

    A halin da nake ciki bai yi aiki ba, ga alama matsalar tana cikin direban geforce 310m.
    duk da haka godiya!
    🙂

  23.   Cristian m

    Godiya sosai!! Ya yi aiki kusan cikakke a gare ni, lokacin da na sanya shi, ƙudurin ya ɓata amma na shiga murmurewar Ubuntu, kuma na gaya masa ya gyara kuskuren zane kuma ya sanya su ta asali, da lokacin da na fara Ubuntu Na riga na sami ƙuduri!

    Godiya!

  24.   mota m

    Kyakkyawan taimako! Matsalar da nake da ita an warware ta! Ba zai bar ni in sake yin wani kuduri ba (4: 3)!

  25.   Juan m

    Na gode!

    Na gode!

  26.   cikafmlud m

    Yayi kyau! Ina da Xubuntu 14.04. PC ɗin na IBM ne, tare da haɗin Intel ƙira. Ina da sha'awar ƙara ƙudirin mai saka idanu, tunda wanda nake dashi yanzu bai isa ba kuma mai kula ɗin ina tsammanin zai iya ba da kansa.
    Lokacin da nake gudu: ~ $ sudo xrandr
    Ya amsa mani: Ba za a iya buɗe nuni ba
    Katin kamar haka:
    - 00: 02.0 VGA mai daidaitawa mai sarrafawa: Intel Corporation 82865G Hadakar Graphics Controller (sake 02)
    Ina fatan taimakon ku. na gode

  27.   Gerardo m

    Da farko dai, na gode sosai da gudummawar da kuka bayar.
    Nayi bayanin lamarin na, domin duk da ban warware shi kwata-kwata ba, albarkacin ku ne na samu damar sanya shi yayi kyau sosai.

    Matsalata ita ce ban iya sanya alamar zaɓin allo ba dangane da saka idanu na HP Passport 1912nm (http://es.engadget.com/2012/05/09/hp-passport-1912nm-internet-monitor-la-pantalla-independiente/) Kudurin shine kamar haka: 1366 × 768 60hz.
    Tsarin shine:
    Intel pentium D processor mai kwakwalwa 3.00 ghz x2
    Intel g33 zane-zane
    Don haka ubuntu 14.04 lts 64bits

    Batun da ake magana a kai shine cewa ta hanyar yin duk abin da kuka nuna, na sami damar haɗawa da irin wannan ƙuduri: 1368 × 768 60hz
    amma ba wanda nake so ba: 1366 × 768 60hz

    Nayi kokarin gyara gedit tunanin cewa yana canza lamba ne (8 don 6) kuma lokacin da na sake farawa sai ya bani kuskure tare da wani babban allo da kuma babban gargadi tare da maimaitawa da yawa, wanda na warware ta barin komai a yadda yake ( Na yi madadin xorg.conf kuma na sake yi.

    Da kyau, na ci gaba amma har yanzu ina da batun allon wanda ba shi da cikakken bayani game da ƙuduri. A can ya faru da ni don ganin idan akwai wani abin da zan yi daga mai saka idanu.

    Abin da na samo abu ne mai yarda sosai, ba tare da zama mai kyau ba. Mai saka idanu yana ba ni damar sanya allon tsakiyar (an daidaita shi a dama kuma rabin mai ƙaddamar a gefen hagu ba a bayyane) kuma don taƙaita bangarorin. Wato, an bar ku da raunin rashin kulawa mara kyau.

    Don tsakiyar shi:
    babban menu / sarrafa hoto / matsayi a kwance
    sanya shi karami:
    babban menu / sarrafa osd / matsayi a kwance

    Kuma shi ke nan. Ina fatan wani zai amfane ku.
    Gaisuwa daga Montevideo, Uruguay

  28.   Iker m

    Barka dai, da farko dai barka da karatu.
    Nayi bayanin lamarin na, Ina da LG tare da shigar analog na D-Sub. Ubuntu 14.04, Na yi gwajin tare da matsakaicin matsakaicin allo na 1600 * 900, allon ya daidaita, amma matsalar ita ce ma'anar rubutun ya zama mummunan. Anan ga wasu bayanai dalla-dalla:

    Matsayi Mafi Girma 1600 x 900 @ 60Hz
    Filin pixel 0,2712 x 0,2626mm
    16,7M goyon bayan launi
    Ganin Hangen H: 90 ° / V: 50 °
    Takamaiman Frequency 30 ~ 83 kHz
    Yanayin Tsaye 56 ~ 75 Hz

    Shin zaku iya ƙara wani nau'in umarni don mafi dacewa daidaita sigogin da umarnin cvt (1600 900) ya dawo?
    Lokacin aiwatar da wannan umarnin ina samun wannan sakamakon:
    # 1600 × 900 59.95 Hz (CVT 1.44M9) hsync: 55.99 kHz; pclk: 118.25 MHz
    Modeline «1600x900_60.00» 118.25 1600 1696 1856 2112 900 903 908 934 -hsync + vsync

  29.   douglas m

    Na gode sosai da yayi min aiki! amma ina da matsala ba zan iya canza fuskar bangon waya ba na zaba kuma komai yayi daidai, amma canjin baya tasiri. Shin wani zai iya gaya mani abin da zan yi?

  30.   Kelvis Quintana m

    Abokin aure na kwana Ina da matsala tare da Linux mints 17 Bani da vga fitarwa ga tv daga kwamfutar tafi-da-gidanka na vit, wane umarni zan yi ko kuma wane malami zan jagoranta don yin haka?

    1.    bari muyi amfani da Linux m

      Barka dai! Wataƙila waɗannan bayanan masu zuwa za su amfane ku:
      https://blog.desdelinux.net/xrandr-poderosa-herramienta-para-configurar-tu-monitor/
      https://blog.desdelinux.net/xrandr-poderosa-herramienta-para-configurar-tu-monitor/
      Ina kuma ba da shawarar cewa ku bincika shafukanmu don abubuwan da ke ɗauke da kalmomin "xrandr", ko maɓallan masu amfani da su ("arandr", "lxrandr", da sauransu)
      Rungume! Bulus.

  31.   Javier m

    hello, Ina bukatan taimako a harkata Ina da 32 ″ lcd tv ubuntu 12.4 ya gane shi a matsayin 49 ″, radeon hd 5450, Na riga na girka direba amma babu wani ƙuduri da ya yi daidai

    1.    bari muyi amfani da Linux m

      Wataƙila a cikin wasu waɗannan labaran game da xrandr da abubuwan da yake gani (arandr, lxrandr, da sauransu) zaku sami mafita:
      https://blog.desdelinux.net/?s=xrandr
      Murna! Bulus.

  32.   Adrian m

    Matsayi mai kyau, amma yanzu na sami sabuwar matsala: resolutionudurin da na samu, kuma, a ka'idar, mafi girman abin da mai saka idanu ke tallafawa (LG FLATRON W1934s, OS ubuntu 14.04 32bits), ba ya aiki da kyau, wato, saka idanu yana cin yawancin allo, a hankali game da 7-8 cm a kowane bangare, kuma yana tilasta ni in koma ga ƙuduri 4: 3, wanda ba shi da daɗi sosai yayin bincika yanar gizo, duk wata mafita?

  33.   Jorge Stranieri ne adam wata m

    Ina so in ga ko zan iya barin ci ko wani abu, amma ban ga hah ba. Nayi komai daga mataki zuwa mataki kuma yayi min daidai!

    Na gode sosai !

  34.   marvin padilla m

    wow encerio koyarwar ku ta taimaka min !! yanzu ga alama yana gane ƙudurin da nake so! akan mint mint 17! kawai a cikin zaɓi don canza saka idanu Ina samun zaɓi na 1440 × 900… (wanda a halin da nake ciki yana aiki kamar 1920 × 1080)… Ina tsammanin na yi wani abu na suna a cikin xorg.conf…. har yanzu yana yi min godiya

  35.   Alex m

    Mai girma! Yayi min aiki!
    Gode.

  36.   Oscar m

    Na gode sosai da taimakonku; tare da taimakon ku na sami damar magance matsalar da aka gabatar.

    1.    bari muyi amfani da Linux m

      Kuna marhabin, Oscar! Don haka muke.
      Rungumewa! Bulus.

  37.   Francis Balcazar m

    Barka da rana, sakonku bai yi mini aiki ba, ina da wannan matsalar, kwamfutar tafi-da-gidanka na Dell ce inspiron mini 1012 kawai tana da ƙuduri na 1024 × 600, amma a cikin windows da ke gyaran rajistar na samu nasarar ƙara ƙarin shawarwari masu tallafi, gami da wanda Ina bukatan 1024 × 738 (ina tsammani), Na yi abin da sakon ya nuna amma lokacin da na sake farawa bai ba ni wani zabi ba, za a iya yin wani abu? ko ba zan iya yin komai ba? Zan yi matukar godiya da taimakonku: 3 Na gode

  38.   Rene Davida m

    Na gode, ya yi mini abubuwan al'ajabi!

  39.   Ishaku m

    sudo gedit /etc/X11/xorg.conf

    sudo: gedit: ba a samo umarni ba

    me yayi

    1.    bari muyi amfani da Linux m

      gedit shine editan rubutu na asali a cikin GNOME. Kuna iya amfani da KDE ko wani yanayi na tebur. Don tabbatar da cewa zaku iya shirya fayil ɗin ba tare da mahalli ba, Ina ba da shawarar amfani da Nano.
      Umurnin zai yi kama da wannan:

      sudo nano /etc/X11/xorg.conf

  40.   shekarusuque m

    Na bi duk matakan kuma yayi aiki cikakke godiya ga bayanin

  41.   Marcos m

    Kai, na gode ƙwarai da gaske ya yi mini aiki daidai! 😀

    1.    bari muyi amfani da Linux m

      Marabanku! Murna! Bulus.

  42.   tanki m

    KARSHE! Kudina yayi amma a karshe! Kuma ana yabawa ... ba tare da ƙuduri ba ina bankwana da Linux. Ina da matsaloli iri-iri daga rasa yanayin zane da kuma sake sanya OS (Ni sabon shiga ne) don rashin amfani da madaidaitan maganganu a cikin gedit, amma na nace na kwana 2 kuma na sami damar tare da mai saka idanu 1680x1050. Ina haskaka mahimmin taimako na mrgm148 (sharhi 17) wanda zai gyara koyawa na asali. Godiya da jinjina !!

    1.    bari muyi amfani da Linux m

      Da kyau sosai. Na kara saƙo na faɗakarwa da ke bayyana abin da kuke ɗauka.
      Rungumewa! Bulus.

      1.    tanki m

        Barka da zuwa, yana iya zama takaici ga wanda ya fara cikin Linux ba tare da wani abu da aka warware kamar ƙudurin… gaisuwa ba!

  43.   mt Frames m

    uufffff !! wata katuwar ulu da gaskiya ulu ta yi yawa da na riga na amince da cewa akwai wani kuskure…. snif! sake na karaya daga Linux ... har yanzu ina cikin diapers. Babu hanyar da zan tsaya tare da windows…. Duk da haka dai, na gode aboki don gudummawar, amma ina tsammanin maganin ba shi da amfani.

  44.   Laya m

    Sannu,

    Na gwada waɗannan nasihun a kan rasberi (tare da mai fashin baki), komai ya bayyana sosai. Matsalar ita ce lokacin da na sake yi sannan umarnin farawa don shigar da zane mai zane baya aiki. Na kasance ina bincika wuraren tattaunawa kuma mafita shine cire fayil din xorg.conf, dan haka na rasa duk abinda nayi. Shin kun san ko akwai wata mafita?

    Gracias
    Laya

    1.    bari muyi amfani da Linux m

      Sannu Laia!

      Ina tsammanin zai fi kyau idan kun gabatar da wannan tambayar a cikin tambayoyinmu da sabis ɗin amsar da ake kira Tambayi Daga Linux domin dukkan al'umma su taimake ku game da matsalar ku.

      Runguma, Pablo.

  45.   Carlos. m

    Na gode kyakkyawa.

    1280 × 1024 tuni ya bayyana a matsayin zaɓi a kan masu sa ido biyu amma… yana gaya mani cewa iyakar kayan aikin ita ce 2048 2048… Ina da zabi? ko ya fi sauƙi canza katin zane?

    Godiya sake.
    Yabo ya tabbata ga gumakan kwaya 😉

  46.   Juan m

    Na shigar da fakitin kawai da voila !!!! 🙂

  47.   Leonardo m

    Na gudanar da umarnin farko kuma yanzu ban iya ganin komai a cikin tashar ba. Sauran shirye-shiryen suna nuna lafiya. Ta yaya zan mayar?

  48.   Rodrigo m

    Hakan bai yi aiki ba, na gwada amma wani lokacin ina jin cewa Linux ɗin nesa da mai amfani na yau da kullun, ios da windows har yanzu sarakuna ne, umarnin rubutu sun tsufa a cikin waɗannan tsarin

  49.   Alejo m

    Na gode sosai don bayanin da aka bayar a nan. Na yi amfani da shi don gyara matsalar akan Debian kuma yayi aiki daidai ...
    Na gode sosai!!

  50.   Antonio m

    Na gode sosai don bayanan

  51.   Juan Carlos Sanchez mai sanya hoto m

    Barka dai, tambaya, ina da kwamfutar Dell Vostro 470 tare da katin NVIDIA GeForce GTX 960, lokacin da kwamfutar ke aiki da windows, ta nuna ƙuduri na 1280 × 1024 akan masu sa ido biyu da take tallafawa, amma ina so in faɗi windows da amfani Linux a matsayin tsarin karba-karba, Matsala, ita ce daya daga cikin masu sanya ido ya fada min cewa DELL ne kuma tana goyon bayan kudurin, a dayan kuma yana cewa unkown kuma bai wuce 1074 × 768, na yi kokarin bin da yawa darussan amma matsalar ita ce cewa dukansu suna magana game da katunan tare da nuni ɗaya, shin akwai wani abin da za a yi?

    gaisuwa

  52.   Florence m

    Na sanya dukkan tashoshin har zuwa matakin da zan sake kunna pc. Kuma lokacin da na sake buɗe tashar don shiga ta gaba bisa ga koyarwar, sai murabba'i mai baƙi murabba'i ya bayyana, kuma shirye-shiryen da na buɗe wanda nake dasu a cikin mai ƙaddamarwa ba su da sandar take don haka ba zan iya rufewa ko ƙarawa ko rage daga wannan taga ba . Wasu shirye-shirye kamar aikin sikanin buga takardu na suma sun daina aiki. Taya zan koma? Wato, ta yaya zan share waɗannan tashoshin da na shiga?

    1.    Javier Rejon Moreno m

      Na gode sosai, darasin ya kasance da amfani sosai kuma an bayyana shi sosai.

      1.    bari muyi amfani da Linux m

        Kuna marhabin, Javier!

    2.    Gonzalo m

      Ina da matsala iri ɗaya.
      Mafi munin abu shine lokacin da nayi kokarin aiwatar da wani abu wanda yake bukatar password din sudo, bai nuna min taga inda aka shiga ba. Bayan ƙoƙarin sake kunnawa xorg, sake saita shi, da dai sauransu. babu abin da ya yi mini aiki. Dole ne in sake sanyawa daga 0.

  53.   Gonzalo m

    Bayan aiwatar da wannan darasin mataki-mataki kuma daidai, xserver ko xorg na fara gabatar da kurakurai waɗanda ba zan iya murmurewa ba. Dole ne in sake shigar da Linux.
    M.

    1.    kari m

      Sharhinku yana da ban tsoro ganin gaskiyar cewa an buga wannan labarin tsawon shekaru 2. Shin kun sadaukar da kanku don neman ingantaccen bayani?

  54.   Etlan m

     Hola!

    Na gode sosai da darasin, ya taimaka min sosai.

  55.   MALAM m

    [yi gargadi] Taka tsantsan: a cikin wannan darasin sashin Horizsync da Vertrefresh suna da bayanan Monitor tare da ƙuduri na 1440 × 900, don magance wannan matsalar dole ne ku nemo ƙimomin Kulawar ku. [/ kashedi]

    TA YAYA ZAN SAMU WANNAN MAGANA?

    1.    Augusto alvarez m

      Ina da shakku iri daya, a ina zan samu wadancan dabi'u ???

      1.    Mrgm 148 m

        A bayan bayanan kulawa, inda serial din take, akwai wadancan bayanan.

  56.   Mrgm 148 m

    A bayan abin duba ka, inda zaka sami serial, akwai bayanan.

  57.   jesu3 m

    yana aiki daidai akan ubuntu 16.04

  58.   gefe m

    Ina aiki akan ubuntu mate 16.04

  59.   Raul Cantero m

    Lokacin da na adana Gedit kuma na rufe shi sai in sami wannan a Terminal:

    (gedit: 3118): Gtk-GARGADI **: Kira hana shigowa bai yi nasara ba: GDBus.Error: org.freedesktop.DBus.Error.ServiceBa a sani ba: Sunan org.gnome.SessionManager ba a ba shi da kowane fayil ba. sabis

    ** (gedit: 3118): GARGADI **: Kafa daftarin aiki metadata ya kasa: Kafa metadata :: gedit-sihiri-sa sifa ba ta da tallafi

    ** (gedit: 3118): GARGADI **: Kafa bayanan metadata ya gaza: Kafa metadata :: gedit-encoding sifa baya tallafi

    ** (gedit: 3118): GARGADI **: Kafa daftarin aiki metadata ya kasa: Kafa metadata :: gedit-sihiri-sa sifa ba ta da tallafi

    ** (gedit: 3118): GARGADI **: Kafa bayanan metadata ya gaza: Kafa metadata :: gedit-encoding sifa baya tallafi

    ** (gedit: 3118): GARGADI **: Kafa daftarin aiki metadata ya kasa: Saita metadata :: gedit-status

  60.   Mauritius m

    Pana da gaske na gode sosai saboda gudummawar da ya taimaka min sosai

  61.   Maria m

    Hello.
    Ina da Acer Aspire 3000 Aspire 3003 LMi kuma ya girka Ubuntu 10.04.
    Wani lokacin dana girka ubuntu ya gane jadawalin, amma ba yanzu ba. Na bi duk matakan ka sau biyu, a karo na biyu na canza shawarar ka zuwa 1024 × 768 in dai ya yi yawa ga wannan kwamfutar tafi-da-gidanka, amma ba yadda za a yi in sami ƙarin zaɓuɓɓuka a cikin Monitors, Ina samun 640 × 480 kawai : 4)
    Za a iya taimake ni in gyara wannan?
    Mun gode Maria.

  62.   yasabel añez m

    Canaima baya iya ganin allo, na shiga cikin tsarin ci gaba na danna maballi kuma ba a ga yadda nake yi ba don maido hotunan, don Allah ku same ni, na gode.

  63.   Oscar Martinez Conde m

    Barka dai Ina da acer mai burin 4300 kuma an haɗa shi ta hdmi zuwa plasma 32. » panasonic amma bai gane ni da kyau ba. Udurin ya tsallake gefen x da y kuma ban san yadda zan rage su da ubuntu ba. Kowa na iya taimaka min ??

  64.   zakara mauritius m

    Barka dai, ina yin aikin da aka nuna, amma lokacin da na sake kunna kwamfutar sai tashar ta fito baki daya, lokacin da na bude menu na nuni shima baki ne. My pcnes na a hp duk a cikin intel guda.

    Na gode da taimakon ku

  65.   Matthias m

    Yayi aiki cikakke a gare ni akan Ubuntu 16.04 tare da ƙudurin 1440 × 900, na gode sosai!

  66.   Jose m

    Barka dai, na bi duk matakan da aka nuna, amma bayan sake kunna pc din ba zai bani damar shiga tare da sunan mai amfani na ba. Ba ya nuna wani kuskure cewa kalmar sirri ba daidai ba ce, kawai baƙar fata ce ta 'yan sakan kaɗan sannan ta dawo kan allo inda za ku shigar da mai amfani da pwd. Ina da fuska biyu, ban sani ba idan hakan yana tasiri wani abu. Kafin bin wannan darasin zan iya shiga ba tare da matsala ba.

    Duk wani ra'ayi?

  67.   Ramon m

    A halin da nake ciki, shine mai saka idanu na (LG W1943C) lokacin da aka katse kebul na VGA kuma aka sake haɗawa, ba a gano shi ba amma a cikin Windows kawai kuma ba a cikin Ubuntu ba kamar yadda ya gabata, amma maganin da kuka buga shekaru 5 da suka gabata kuma yayi mini aiki sosai ga Ubuntu 16.04 (kuma da fatan 18.04 kuma). Tabbas, lokacin da na shiga tsarina na secondsan daƙiƙa fuskar bangon waya ta zama salon "mosaic" amma sai ya koma yadda yake. Don haka kodayake ya makara, ya sami nasa "Kamar" kuma ya sami kyakkyawan sakamako. Yanzu ina so in tilasta GRUUB2 ya yarda da shi shima, duk da cewa a halin yanzu ba haka bane. Zan raba shi da kowa ta hanyar Twitter.

  68.   Wilson zauma rojas m

    Ya yi min aiki, na iya magance matsalar.

  69.   MPV m

    Yayi aiki daidai, mai saka idanu na yana da ƙuduri 1920 x 1200. Ina amfani da xubuntu 18.04.1
    Na gode!

  70.   Jorge na V. m

    AYYUKA !!!!!!
    Na gode Pana, da gaske ne kawai abin da ya yi aiki a gare ni don ganin madaidaiciyar ƙuduri a kan mai saka idanu na TV na 32,, ina tunanin cewa wannan shine dalilin da ya sa nake gwadawa da kuma watsar da rikice-rikice da yawa. Debian 10 KDE an adana, Gaisuwa

  71.   Andres m

    Meaunataccena, abin bai yi mini aiki ba, saboda bai ba ni hanyar da za ta iya zama VGA1 ko HDM1 ko wata ba ... to, na yi ta ne ta hanyar gyara gurnin.
    Kuna shigar da taga umarni kuma shirya gurnani, yana canza canjin zane wanda ta tsoho aka kashe, saboda wannan dalilin yana ba kuskuren cewa lokacin da kuka girka allon ƙarami ne ko kuma layin tsayayyar tsaye na pixels ya bayyana.

    Na bar muku yadda ake yin sa daga shafin yanar gizo na infosur iguazu, a nan url idan yana aiki ga wani, https://infosuriguazu.com/blog-post/cambiar-la-resolucion-de-pantalla-en-linux-mint-19/

    Sa'a mai kyau da sharhi idan kuna iya saita shi.

  72.   Edwin m

    Ban san yadda zan iya bayyana godiya yadda gudummawar ku ta samar min ba, aboki!

  73.   kudhirima m

    Ya masoyi.
    A gare ni ba ya aiki.
    Ina bin su sosai, sau da yawa. Amma babu wani abu kamar ƙuduri na 1024 × 768 da ya bayyana a gare ni.
    Ban sani ba idan za a sami wasu shawarwari. Abin da gaskiya ne shi ne ya ba ni kuskure lokacin shigar da sudo add-apt-repository ppa: xorg-edgers / ppa.
    Ya gaya mani:
    ** Da fatan za ayi amfani da ppa-purge don cire wannan PPA. An ba da shawarar * musamman * don yin hakan kafin haɓakawa zuwa sabon sakin ubuntu! **
    Ƙarin Bayani: https://launchpad.net/~xorg-edgers/+archive/ubuntu/ppa
    Latsa [ENTER] don ci gaba ko Ctrl + C don soke ƙari.

    Kuma lokacin da na latsa shiga sai ya gaya mani abubuwa masu zuwa:
    Kuskure: 7 http://ppa.launchpad.net/xorg-edgers/ppa/ubuntu mai da hankali Saki
    404 Ba a Samu Ba [IP: 91.189.95.85 80]
    Obj: 8 http://es.archive.ubuntu.com/ubuntu mai da hankali-sabunta InRelease
    Obj: 9 http://es.archive.ubuntu.com/ubuntu kwaskwarima-bayanan baya InRelease
    Karatun jerin kunshin ... Anyi
    E: Ma'ajin "http://ppa.launchpad.net/xorg-edgers/ppa/ubuntu mai da hankali Release" bashi da Sakin Saki.
    N: Bazaku iya sabuntawa daga ma'ajiyar ajiya kamar wannan a amince kuma saboda haka an dakatar dashi ta hanyar tsoho.
    N: Duba shafin mutum mai amintaccen (8) don cikakkun bayanai akan ƙirƙirar wuraren ajiya da saita masu amfani.

    Rungumi da godiya saboda gudummawar.

  74.   Antonio Huerta ne adam wata m

    Wannan shine mafita. Na gode, masoyi Alejandro.
    gaisuwa

  75.   hypolith landaeta m

    Sannu tawagar taimako, Ina matukar godiya gare ku da wannan labarin. a yau na shigar da ubuntu 21.10 a karon farko a cikin pc inda nake adana bayanan fasaha, kuma na sami matsala cewa na kasa daidaita ƙudurin na'urar, bayan da na yi bincike sosai a intanet tare da sake karantawa daban-daban posts waɗanda ba su yi nasara ba. aiki a cikin akwati na kuma a ƙarshe na sami wannan kuma na ɗauka mataki zuwa mataki kuma a ƙarshe bayan sake kunna pc ƙuduri yana daidaitawa.
    nagode sosai kuma Allah yaci gaba da saka muku albarka