Ukubhengeza ukusebenza kweGentoo ngeBrightside kunye neSkippy

Ngaphambili yayisele ipapashiwe indlela yokufumana isiphumo kwezinye i-distros ngu-Brizno. Kule nqaku siza kubona indlela yokwenza ngayo kwi-Gentoo.

Kulabo abangaziyo ukuba yintoni isiphumo sokuveza, kujongeka njengoku:

NjengakwiGnome xa usiya kwimisebenzi, ibonisa ngokusisiseko zonke izicelo ezivulekileyo ngoku-odola kwiscreen, kwaye ikuvumela ukuba ukhethe nayiphi na phakathi kwezo zisibonisayo.

Amakhonkco malunga nezinye i-distros:

Arch Linux

Debian kunye neziphumo

Ukugqithisa

Siza kusebenzisa iOverlays, ke ukuba abanayo, masifake i-layman, enokuthatha ixesha okanye iiyure, ngakumbi ukwenza i-git:

USE="git subversion" sudo emerge -a layman

Kuyinto enqwenelekayo ukuba bongeze Ukubhukuqwa kwe-git sele ibandakanyiwe ngasentla, ungalibali ke ukuba kukho ezinye ii-USE ezikhoyo, ngaphezulu kwazo zonke zizi-USEs esekwe kwi-Overlay, ukuba uyayifuna kwaye ungaphindisi umntu ohleliyo.

- - Bazaar: Inkxaso ye-dev-vcs / i-bzr esekwe ngaphezulu - - ii-cvs: Inkxaso ye-dev-vcs / cvs esekwe ngaphezulu - - i-darcs: Inkxaso ye-dev-vcs / darcs esekwe ngaphezulu + + git: Inkxaso yeev-vcs / git esekwe ngaphezulu - ngaphezulu - i-mercurial: Inkxaso ye-v-vcs / imo egqubutheleyo esekwe kwimurikri

Ukongeza ukuBekwa ngaphezulu

Ungalibali ukuxelela make.conf ukuba usebenzise ukungqanyaniswa ukuba awuzange wenze njalo:

echo "source /var/lib/layman/make.conf" >> /etc/portage/make.conf

Ngoku sebenzisa lo myalelo ulandelayo ukongeza ukugqunywa ngaphezulu ukutsha, Yeyona iqulethe ulwakhiwo.

layman -a swegener

Ukulungelelanisa imeko

I-url ebuild yokukhuphela ikhowudi yemithombo ngexesha lokubhala ayifumaneki, ke kuya kufuneka uhlele i-ebuild ngesandla:

sudo nano /var/lib/layman/swegener/gnome-extra/brightside/brightside-1.4.0.ebuild

Kumgca kunye I-SRC_URI =, endaweni ye-URL ngale:

http://pkgs.fedoraproject.org/repo/pkgs/brightside/brightside-1.4.0.tar.bz2/df6dfe0ffbf110036fa1a5549b21e9c3/brightside-1.4.0.tar.bz2

Emva koko siza kuvelisa i-hash entsha:

sudo ebuild /var/lib/layman/swegener/gnome-extra/brightside/brightside-1.4.0.ebuild digest

Faka iBrighside

sudo emerge -a gnome-extra/brightside

Qulunqa iSkippy-XD

Faka i-mercurial, enokuthi ithathe ixesha, kwaye iya kusivumela ukuba sikhuphele umkhombandlela wolawulo

sudo emerge -a mercurial

Oku kuyakukhuphela skippy ngokudityaniswa:

hg clone https://code.google.com/p/skippy-xd/

Siyaqhubeka nokuqulunqa:

cd ~/skippy-xd

make

sudo make install

Ukuqwalasela

Yongeza i-brightside kwiinkqubo zakho zokungena, umzekelo kwibhokisi evulekileyo ~/.config/openbox/autostart kufuneka bongeze:

brightside &

Phumeza:

brightside-properties

Kwaye iwindow yoqwalaselo lweScreen Actions iya kuvela, simakisha isangqa se "Izenzo ezilungisekayo" kwaye simakisha ibhokisi kwikona yesikrini esifuna ukuyenza, kulo mzekelo iya kuba yikona esezantsi ekhohlo (Ezantsi kwikona yasekhohlo) kwaye kwimenyu yayo ehlayo siya kukhetha "Isenzo sokwenza ngokwezifiso ..." kwaye enye iwindow iya kubonakala njengale mfanekiso olandelayo:

Icala eliqaqambile

Siyavala kwaye sibale ngokuqaqamba:

Guqula ixesha lokuphendula (Uyazikhethela)

Ndikucebisa ukuba uhlele isantya ukuba ixesha lokuphendula libonakala licotha, ewe ukuba sele lilungile njengoko lisebenza ungatsiba eli nyathelo.

Kwindawo yokwazisa kufuneka babe ne icon entsha, yinike nqakraza yesibini, ngoku nqakraza kuyo Ezikhethwayo

Kwibha ebonisiweyo hlengisa isantya njengoko unqwenela, ungaqhuba ngokuthe ngqo:

brightside-properties

Ilungile, sele unefuthe elichaziweyo kwi-Gentoo yakho.