Ukufaka i-HP Multifunction kwiArchLinux

Molweni balingane, apha ndinishiya isikhokelo esincinci sendlela yokufaka i-HP multifunction kwiArchLinux.

Okokuqala kufuneka sifake iipakethe eziphambili:

sudo pacman -S cups ghostscript gsfonts hplip

Emva kokufaka ezi phakheji, siqhubeka nokudala iinkonzo kwaye siqale.

Qalisa:

sudo systemctl enable cups.service

Qalisa:

sudo systemctl start cups.service

Ukuba abazange bayenze ngexesha lofakelo, kufuneka songeze umsebenzisi wethu kwiqela lp nakwiqela isikeni:

sudo gpasswd -a scanner

sudo gpasswd -a lp

Nje ukuba sifake iipakethe, kwaye songeze umsebenzisi wethu kumaqela akhankanywe ngasentla, konke okuseleyo kukuqwalasela umshicileli.

sudo hp-setup

Umyalelo wangaphambili ufuna amathala eencwadi ukuba asebenze, ukuba awufuni ukuwafaka kwaye uwaqwalasele kwi-terminal, yongeza nje -i kumyalelo.

sudo hp-setup -i

Isikrini esisibonisayo sinomdla kakhulu.

Uqiniseke kangakanani i-USB multifunction, nika nje [Ngena] kumyalelo wokuqala, uze uphendule imibuzo elula, apho banokunika igama kwisixhobo, kwaye ukuba bafuna ukukhankanya indawo. Umzekelo: I-Multifunction 1, igumbi lokuhlala.

Nje ukuba kugqityiwe, kuya kuba yimfuneko ukufaka isoftware ethile yokuskena, kuba sinokuprinta naphi na apho sikhoyo, i-Free Office, njl.

Ndikhetha i-Simple-Scan

sudo pacman -S sane simple-scan

Iza kufaka ezinye izinto ezixhomekeke kuyo.

Xa ugqiba ukuhlohla, ukuba uvula i-scan elula, iya kukuxelela ukuba ayifumani nasiphi na isixhobo, ngoku siyayisombulula.

sudo sane-find-scanner

Nje ukuba uyifumene, kuya kufuneka uqhubeke nokukhulula umgca ophilileyo.

sudo nano /etc/sane.d/dll.conf

Ekugqibeleni, sikhulula umgca othi hayi

Nantsi indlela eyenzeka ngayo:

#hpaio

Nantsi indlela ekufanele ibonakale ngayo:

hpaio

Siyagcina kwaye sivale.

Ngoku, sivavanya iskena, singayenza nge-terminal:

sudo scanimage -L

Okanye siya kwi-scan-scan kwaye siskena into ethile.

Kuphelele apho okwangoku, ndiyathemba ukuba ikuncedile. Nawuphi na umbuzo, uyazi 😀

Ukubulisa

UIvan!